Searching...
 
 
Location & Directions 215-355-1166
Mon-Thur: 10a-6p// Fri: 10a-8p // Sat: 10a-5p // Closed
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Size

+ more sizes
VisaMasterCard
 

Tools

515 Results
Per Page 30 60
1 2 3 4 5 Next >>
Park Tool Replacement Chain Tool Pin
$1.69 - $3.95

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs [more]

Hayes Bleed Kit Adapter
$2.88 - $11.55

Bleed fittings specifically designed for Hayes hydraulic disc brakes. [more]

Park Tool Tire Lever Set (Set of 2)
$3.29

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two. [more]

Problem Solvers Replacement Pump Head O-Ring
$3.50

If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original pump head o-ring, no problem, here's the replacement part to get you back up and running. [more]

Park Tool Replacement Chain Tool Pin (2-Pack)
$3.90

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate. [more]

Park Tool Chainring Nut Wrench
$3.95

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts. [more]

Bontrager Tire Levers
$3.99

Bontrager's Tire Levers handle the toughest tire-and-rim combinations. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, high-strength plastic levers fit your hands great for superior leverage. [more]

MSW GPK-100 Glueless Patch Kit
$3.99

Getting a flat is a pain in the butt. It's an even bigger pain if you don't have the stuff you need to get back home. MSW's GPK-100 glueless patches will help get you back to where you need to be. • Six patches • Sandpaper • Instructions included [more]

Product Rating
 
5.0 stars
 (1 Review)
Park Tool Tire Lever Set
$3.99

Park's Tire Lever Set is made of high-strength nylon for long life and to prevent tube or rim damage. The levers make tire removal easy and won't pinch tubes. Everyone should have a set of these reliable levers. [more]

Park Tool Tire Lever Set (Set of 3)
$3.99

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes… [more]

Park Tool Double-Ended Cone Wrench
$4.95

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most… [more]

Park Tool Head Seal Kit
$4.95

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1… [more]

Park Tool Shop Screwdriver
$4.95 - $5.49

Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip. [more]

FSA Carbon Fiber Assembly Compound
$4.99 - $29.99

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be… [more]

MSW Tire Lever
$4.99

MSW's Tire Levers help you fix your flat quickly and get back on the road! - Lightweight, low-profile lever - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together - Durable composite construction - Easy to get under the tire bead [more]

Product Rating
 
4.5 stars
 (2 Reviews)
Park Tool Gear Clean Brush
$4.99

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great… [more]

Product Rating
 
5.0 stars
 (1 Review)
Pedro's Tire Levers
$5.00 - $120.00

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare… [more]

Kool-Stop Sport Tire Lever
$5.90

• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface [more]

Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps. [more]

Park Tool Hex Wrench (8mm)
$5.95

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts. [more]

Park Tool Metric Wrench
$5.95 - $10.95

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. [more]

Park Tool Open Ended Metric Wrench (8, 10mm)
$5.95

Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance. [more]

Park Tool Open Ended Metric Wrench (9, 11mm)
$5.95

Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability. [more]

Park Tool Tape Measure
$5.95

Precision measurement awaits with Park's Tape Measure. This small and handy tool boasts a tough, composite housing, as well as both Metric and English readings of up to 3.65 meters/12 feet. [more]

Evo 4/5/6mm Hex Y-Wrench
$5.99

There is no more popular tool in the shop as the 4/5/6mm Hex Y-Wrench. Evo's version has a handle coated with composite for comfort and durability. You should probably buy two. [more]

Park Tool Cassette Lockring Tool
$5.99

Park's FR-5 Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour, Chris King, and SunRace. Made from heat-treated tool steel, the FR-5 features an extra-long splined body to prevent slippage and can also be used to remove and install Shimano disc brake rotors. The FR-5… [more]

Park Tool Y-Wrench Belt Holster
$5.99

make sure you're quick on the draw with Park Tool's Y-Wrench Belt Holster. This easy to use accessory clips right on your waistband, belt, or pocket and and keeps your favorite Park Tool Y-Wrench (sold separately) right by your side. [more]

ProGold EPX Cycle Grease
$5.99 - $15.90

- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications [more]

Pedro's Pro Chain Tool Pins
$6.00

Replacement pins for Pedro's Pro Chain Tool, Pro Chain Tool 2.0, and Apprentice Chain Tool - Includes two replacement pins [more]

Park Tool Cassette Lockring Tool
$6.49

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the… [more]

515 Results
Per Page 30 60
1 2 3 4 5 Next >>