Bike Stuff

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

The Grünnur base layer is the foundation of any cold-weather kit. Soft Merino wool wicks moisture away from the body and insulates even when wet. It’s designed for a comfortable fit without bunching up underneath other layers. - 89% Merino wool-blend fabric insulates even when wet - Long drape in back for extra coverage - Raglan sleeves for more range of motion Comfortable Fit Designed to fit comfortably under the Naughtvind Jacket without bunching up underneath Cycling Specific Base Layer Raglan sleeves for mobility, long drape in back for extra protection, comfort across shoulders when in the riding position

The Grünnur base layer is the foundation of any cold-weather kit. Soft Merino wool wicks moisture away from the body and insulates even when wet. It’s designed for a comfortable fit without bunching up underneath other layers. - 89% Merino wool-blend fabric insulates even when wet - Long drape in back for extra coverage - Raglan sleeves for more range of motion

For days when the mercury plugs below 15 degrees (-9°c), Sturmfist 4 provides unmatched performance by combining superior fabrics and insulation technologies. - Water/wind-resistant shell on back of hand - Water-resistant leather on palm  - 300g Polartec Alpha insulation - Aerogel insulation in palms protects against conductive heat loss

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

This sharp-looking flannel shirt blends comfort, style, and functionality. Keep warm with the insulated sleeves and a micro-fleece lining, and enjoy deluxe touches like button-snap closures.

This sharp-looking flannel shirt blends comfort, style, and functionality. Keep warm with the insulated sleeves and a micro-fleece lining, and enjoy deluxe touches like button-snap closures.

We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims

We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts

Naughtvind Bibs balance warmth and breathability for unmatched comfort on cold-weather rides. We use fabric that’s water-, wind-, and abrasion-resistant on the outside and fleece-lined on the inside to keep the elements out and your body heat in. Pockets and reflective accents offer extra functionality and safety. The chamois-less design lets you pair Naughtvind Bibs with your favorite cycling shorts. We designed these winter cycling bibs to layer under our Naughtvind Pants for truly frigid days on the bike. - Chamois-less design for pairing with your favorite chamois shorts - Thermal fleece lining to retain body heat - Breathable mesh back for ventilation - 4/5 length fits with winter boots without bunching - Reflective accents for safety - Pocket storage for ride essentials - Made with sustainable materials

With the Ultra Scooter 402 from ABUS, you can protect your motorbike or scooter with one of the safest types of lock available: a U-lock. The round handle is made of 11mm specially hardened steel and is double-locked in the lock body. The modern design of the Ultra Scooter 402 fits well in your hand and makes it easy to use. The lock body and the locking mechanism behind it impress with the same quality steel as the shackle itself. The Ultra Scooter 402 also has a lot to offer against more subtle theft methods, such as picking attempts, thanks to its high-quality locking cylinder. - 11mm, hardened steel round shackle - Double-locking mechanism securing the shackle in the lock body - The shackle, the body, and the load-bearing parts of the locking mechanism are manufactured using specially hardened steel - Special, modern design of the lock body casing allows for optimum handling - High-quality locking cylinder for protection against manipulation, e.g., picking - Four keys included with the lock

Super hardened steel designed for high torque Singlespeed and BMX use.

- Durable CrMo construction with 4-pawl internal engagement system - Fits left-hand (LH) threaded hubs only (allows mounting drivetrain on left side of bike for grinding on the right side) - Maintain with petroleum based lubricant (no wax/Teflon)

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Key service - For B type casing - 68 grams

- Key service - For B type casing - 181 grams

- Key service - For B type casing - 110 grams

- Key service - For B type casing - 178 grams

- Hardened steel bracket and lock housing - Anti drilling plate in cylinder - Flexible fixing set also for odd sized frames - Online key service - Maximum security with plug in option - 720 grams

- Defender ring lock with E-bike battery lock - The ring lock has maximum security with plug in option - Hardened steel bracket and lock housing - Anti drilling plate in cylinder - Online key service - 720 grams/181 grams

- Fold folding lock with E-bike battery lock - Length 85 cm - Soft sides prevent scratching - Fits all frames - Cylinder protected agains dust and dirt - Online key service - 953 grams/181 grams

- Aheadset preload adjusting bolt

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread

Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.